Panasonic SC-PMX70 Owners Manual - Page 8
Inserting media, Media playback controls
View all Panasonic SC-PMX70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Inserting media CD Label facing up OPEN/CLOSE OPEN/CLOSE Press [CD/USB] to select "CD". iPhone/iPad/iPod or USB device • Connect only compatible iPhone/ iPad/iPod models (> 7). Failure to do so may result in unexpected behaviour. 5V 2.1A Press [CD/USB] to select "USB". The display will automatically change to "IPOD" when a compatible iPhone/iPad/iPod is connected to the port. Charging an iPhone/iPad/iPod During unit on, charging starts when an iPhone/iPad/ iPod is connected to this unit. • To continue charging from the USB cable connection during standby mode, make sure the iPhone/iPad/iPod has started charging before turning the unit to standby mode. • Check the iPhone/iPad/iPod to see if the battery is fully charged. (Once fully charged, remove the iPhone/iPad/ iPod.) Note: • Remove the CD only after it stops rotating. • When connecting an iPhone/iPad/iPod, use the dedicated USB cable (not supplied). • Insert the USB device directly. Do not use any USB extension cable. 8 • Please disconnect the USB device if you finish using. • Before removing the USB device, select a source other than "USB". RQT9989 Media playback controls The following marks indicate the availability of the feature. [CD]: [iPod]: [USB]: [Bluetooth]: CD audio in CD-DA format and a CD that contains MP3 files Compatible iPhone/iPad/iPod USB devices containing MP3/AIFF/FLAC/ WAV/AAC files Connected Bluetooth® device Preparation • Turn the unit on. • Insert the media or connect the Bluetooth® device. • Press [CD/USB] or [ ] to select the audio source. Basic controls [CD] [iPod] [USB] [Bluetooth] Play Press [1/;]. Stop Press USB]: The position is memorized and "RESUME" is displayed. • [USB]: Press [∫] two times to stop the playback fully. Pause Press [1/;]. Press again to continue playback. Skip Press [:] or [9] to skip track. (main unit: [:/6] or [5/9]) [CD] [USB]: Press [3] or [4] to skip the MP3/AIFF/FLAC/WAV/AAC album. Search During play or pause Press and hold [6] or [5]. (main unit: [:/6] or [5/9]) • [iPod]: Backwards search is only within the current track. Note: • To use this unit's remote control with a Bluetooth® device, the Bluetooth® device must support AVRCP (Audio Video Remote Control Profile). Depending on the status of the device, some controls may not work. • Operation results may vary depending on the iPhone/iPad/ iPod models. • [CD] [USB]: Tracks can be selected by pressing the numeric buttons. Viewing available information [CD] [USB] [Bluetooth] Press [DISPLAY] repeatedly. e.g. MP3 "A": Album number "T": Track number (" " stands for a number.) " ": Album " ": Track Note: • Maximum characters that can be shown: approximately 32 • This system supports ver. 1 and 2 ID3 tags. • Text data that the system does not support can show differently. Play menu [CD] [USB] 1 Press [PLAY MENU] to select "PLAYMODE" or "REPEAT". 2 Press [2, 1] to select the setting and then press [OK]. PLAYMODE OFF PLAYMODE 1-TRACK 1-ALBUM RANDOM 1-ALBUM RANDOM REPEAT ON REPEAT OFF REPEAT Cancels the play mode setting. Only plays the selected track. • "1", " " is displayed. (Skip to the desired track.) Only plays the selected MP3/AIFF/ FLAC/WAV/AAC album. • "1", " " is displayed. Plays the contents randomly. • "RND" is displayed. Plays the tracks in the selected MP3/ AIFF/FLAC/WAV/AAC album randomly. • Press [3] or [4] to select the MP3/ AIFF/FLAC/WAV/AAC album. • "1", " ", "RND" is displayed. Turns on repeat mode. • "`" is displayed. Turns off repeat mode.