Panasonic SC-PT160 User Manual - Page 28

Using the radio Manual tuning 1 To select "FM". OR (main unit) (remote control) 2 To select "MANUAL". (main unit) 3 To select the frequency. OR (main unit) (remote control) Press and hold [4 TUNING 3] until the frequency starts scrolling to start automatic tuning. Tuning stops when a station is found. Presetting the channel Remote control only Up to 30 stations can be set for FM. 1. While listening to the radio broadcast Press [ENTER]. 2. While the frequency and "PGM" are flashing on the display Press the numeric buttons to select a channel. • To select a 2-digit number Example: To select 12, • Alternatively, press [4, 3], then press [ENTER]. The station occupying a channel is erased if another station is preset to that channel. Automatic presetting 1 To select "FM". OR (main unit) 2 Press and hold. (remote control) OR (main unit) (remote control) Release the button when "FM AUTO" is displayed. The tuner tunes to the lowest frequency and starts to preset all the stations it can receive into the channels in ascending order. • "SET OK" is displayed when the stations are set, and the radio tunes to the last preset station. • "ERROR" is displayed when automatic presetting is unsuccessful. Preset the channels manually (\ see left). Selecting the preset channels 1 To select "FM". 2 To select the channel. TO • Alternatively, press [4, 3]. • To perform the step on the main unit, first press [-TUNE MODE] to select "PRESET", and then press [4 TUNING 3] to select the channel. When a stereo FM broadcast is being received, "ST" lights in the display. If noise is excessive in FM Main unit only Press and hold [-FM MODE] to display "MONO". Press and hold [-FM MODE] again to cancel the mode. The mode is also cancelled when you change the frequency. OTHER OPERATIONS ENGLISH RQTX0122 28 RQT8043