Panasonic SC-PT160 User Manual - Page 35

7 Sound abnormal or improper Page Sound is distorted. • Noise may occur when playing WMA. - Effects do not work. • Some audio effects do not work or have less effect with some discs. - • Dolby Pro Logic II does not work if you have changed the play speed. - Humming is heard during play. • An AC mains lead or fluorescent light is near the main unit. Keep - other appliances and cables away from the main unit. No sound. • There may be a slight pause in sound when you change the play - speed. 7 Picture abnormal or unviewable The picture on the television • The unit and television are using different video systems. - is not displayed correctly or Use a multi-system or PAL television. disappears. • The system used on the disc does not match your television. - PAL discs cannot be correctly viewed on an NTSC television. - - This unit can convert NTSC signals to PAL 60 for viewing on a 25 PAL television ("NTSC DISC OUT" in "VIDEO" tab). • Ensure that the unit is connected directly to the television, and is 31 not connected through a video cassette recorder. • Mobile telephone chargers can cause some disturbance. - • If you are using an indoor television antenna, change to an - outdoor antenna. • The television antenna wire is too close to the unit. Move it away - from the unit. Picture size does not fit the • Change "TV ASPECT" in the "VIDEO" tab. 24 screen. • Use the television to change the aspect. - • Change the zoom setting. ("ZOOM" in Functions menu.) 22 Menu is not displayed • Restore the zoom ratio to "NORMAL". ("ZOOM" in Functions 22 correctly. menu.) Auto zoom function does not • Turn off television zoom function. - work well. • Zoom function may not work well, especially in dark scenes and - may not work depending on the type of disc. 7 Unit displays The display is dark. • Select "BRIGHT" in "FL DIMMER" in the "OTHERS" tab. 25 "NO PLAY" • You inserted a disc the unit cannot play; insert one it can. 12 • You inserted a blank disc. - • You inserted a disc that has not been finalized. - "NO DISC" • You have not inserted a disc; insert one. - • You have not inserted the disc correctly; insert it correctly. 16 "OVER CURRENT ERROR" • The USB device is drawing too much power. Switch to DVD/CD - mode, remove the USB and turn the unit off. "F61" • Check and correct the speaker cable connections. 8 If this does not fix the problem, consult the dealer. "F76" • There is a power supply problem. Consult the dealer. - "DVD U11" • Disc may be dirty. Wipe it clean. 27 "ERROR" • Incorrect operation performed. Read the instructions and try - again. "DVD H & &" "DVD F & & &" & stands for a number. • Trouble may have occurred. The numbers following "H" and "F" - depend on the status of the unit. Turn the unit off and then back on. Alternatively, turn the unit off, disconnect the AC mains lead, and then reconnect it. • If the service numbers fail to clear, note the service number and - contact a qualified service person. "REMOTE 1" or "REMOTE 2" • Match the modes on the main unit and remote control. Depending 33 on the number being displayed ("1" or "2"), press and hold [ENTER] and the corresponding numbered button ([1] or [2]) for at least 2 seconds. RQTX0122 REFERENCE ENGLISH 35 RQT8043