Panasonic SCHC38 SCHC38 User Guide - Page 10

Sound adjustment The following sound effects can be added to the audio output. 1 Press [SOUND] repeatedly to select the effect. 2 Press [3, 4] to select the setting and then press [OK]. Direct-Vocal Surround (D.SURROUND) "LEVEL 1", "LEVEL 2" or "OFF". ≥ The factory preset is "OFF". Preset EQ (PRESET EQ) "HEAVY" (heavy), "SOFT" (soft), "CLEAR" (clear), "VOCAL" (vocal) or "FLAT" (flat/off). ≥ The factory preset is "HEAVY". Bass (BASS) or Adjust the level (j4 to i4). Treble (TREBLE) Dynamic Bass*1 (D.BASS) "ON D.BASS" or "OFF D.BASS". ≥ The factory preset is "ON D.BASS". *1: This function can also be selected with the [D.BASS] button on the unit. ≥ You may experience a reduction in sound quality when these effects are used with some sources. If this occurs, turn the sound effects off. Clock and Timer Setting the clock This is a 12-hour clock. 1 Press [SETUP] repeatedly to select "CLOCK". 2 Press [3, 4] to set the time and then press [OK]. ≥ To display the clock, press [SETUP] to select "CLOCK" and then press [OK] once. The time is displayed for 10 seconds. (During standby, press [DISPLAY] once.) ≥ The clock is reset when there is a power failure or when the AC power supply cord is removed. ≥ Reset the clock regularly to maintain accuracy. *1: "CD", "IPOD_DOCK", "IPOD_PORT" and "FM" can be 10 set as the music source. RQT9742 Play timer You can set the timer so this unit turns on at a certain time every day. Preparation Set the clock (l left). ∫ Setting the timer 1 Press [SETUP] repeatedly to select "TIMER ADJ". 2 Press [3, 4] to set the starting time ("ON TIME") and then press [OK]. 3 Press [3, 4] to set the finishing time ("OFF TIME") and then press [OK]. ∫ Turn the timer on 1 Select the music source*1 and set the desired volume. 2 Press [SETUP] repeatedly to select "TIMER SET". 3 Press [3, 4] to select "SET" and then press [OK]. ≥ "F" is displayed. ≥ To turn the timer off, select "OFF". 4 Press [Í] to turn the unit off. ≥ To display the timer settings, press [SETUP] repeatedly to select "TIMER ADJ" and then press [OK] once. The music source and volume will also be displayed if the timer is turned on. ≥ During standby, if the timer is turned on, press [DISPLAY] twice to display the settings. ≥ This unit can be used as normal after the timer is set, however: - Turn the unit to standby mode before the timer start time. - Even if the audio source or the volume is changed, the timer will still use the audio source and volume that was set when the timer was turned on. Sleep timer The sleep timer can turn the unit off after a set time. 1 Press [SETUP] to select "SLEEP". 2 Press [3, 4] to set the time (in minutes) and then press [OK]. "SLEEP 30" ,. "SLEEP 60" ,. "SLEEP 90" ,. "SLEEP 120" OFF (Cancel J ≥ The remaining time is indicated on the unit's display except when other operations are performed. ≥ The play timer and sleep timer can be used together. The sleep timer always has priority.