Panasonic SCHC38 SCHC38 User Guide - Page 12
iPod/iPhone/iPad operations, Bluetooth, Remote control, Messages - cordless phones
View all Panasonic SCHC38 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Stations cannot be selected. Change the FM frequency step. 1 Press [RADIO] to select "FM". 2 Press and hold [SELECTOR] on the unit. After a few seconds the display changes to show the current lowest frequency. Continue to hold the button down. The lowest frequency changes and the step is changed. iPod/iPhone/iPad operations Cannot charge or operate. ≥ Have you selected the appropriate selector? Press [iPod] to select either "IPOD_DOCK" or "IPOD_PORT". ≥ Check that the iPod/iPhone/iPad is connected properly. (l 6) ≥ The battery of the iPod/iPhone/iPad is depleted. Charge the iPod/iPhone/iPad, and then operate again. ≥ Connect the iPod/iPhone/iPad again or try to restart the iPod/iPhone/iPad. ≥ When this unit is in standby mode, charging will not start when using the "IPOD_PORT" connection. Turn this unit on and make sure the charging has started before switching this unit to standby mode. Bluetooth® Pairing cannot be done. ≥ Check the Bluetooth® device condition. The device cannot be connected. ≥ The pairing of the device was unsuccessful or the registration has been replaced. Try pairing the device again. (l 7) ≥ This unit might be connected to a different device. Disconnect the other device and try pairing the device again. (l 7) The device is connected but audio cannot be heard through this unit. ≥ For some built-in Bluetooth® devices, you have to set the audio output to "SC-HC38" manually. Read the operating instructions for the device for details. The sound is interrupted. ≥ The device is out of the 10 m (33 ft) communication range. Bring the Bluetooth® device closer to this unit. ≥ Remove any obstacle between this unit and the device. ≥ Other devices that use the 2.4 GHz frequency band (wireless router, microwaves, cordless phones, etc.) are interfering. Bring the Bluetooth® device closer to this unit and distance it from the other devices. ≥ Select "MODE1" for stable communication. (l 7) Remote control The remote control doesn't work properly. ≥ The remote control and this unit are using a different code. (l 13, "REMOTE ") ≥ Is the battery depleted or is the battery inserted incorrectly? (l 4) Messages The following messages or service numbers may appear on the unit's display. "--:--" ≥ You plugged the AC power supply cord in for the first time or there was a power failure recently. Set the time (l 10). "ADJUST CLOCK" ≥ Clock is not set. Adjust the clock accordingly. "ADJUST TIMER" ≥ Play timer is not set. Adjust the play timer accordingly. "AUTO OFF" ≥ The unit has been left unused for about 30 minutes and will shut down within a minute. Press any button to cancel it. "CANNOT SET" ≥ Select an audio source other than "BLUETOOTH". "CHECKING CONNECTION" ≥ The unit is checking the connected iPod/iPhone/iPad. ≥ If this display keeps appearing, make sure that the battery of the iPod/iPhone/iPad is not depleted and that the iPod/iPhone/iPad is turned on and connected correctly. (l 6) "DIMMER" ≥ Appears 10 seconds after the volume is turned to "0". "ERROR" ≥ Incorrect operation is performed. Read the instructions and try again. "F " (" " stands for a number.) ≥ There is a problem with this unit. Note down the displayed number, disconnect the AC power supply cord and consult your dealer. 12 RQT9742