Panasonic SDC615 AJSDC615 User Guide - Page 106

Chapter 8 Specifications Tape Transport System Tape speed: DVCPRO: 33.820 mm/sec DVCPRO 50 SDC905 : 67.640 mm/sec Recording time: DVCPRO: 66 minutes (when AJ-P66MP is used) DVCPRO 50 SDC905 : 33 minutes (when AJ-5P33MP is used) Fast forwarding time: Approx. 1 min. 30 sec. (when AJ-P66MP is used) Approx. 1 min. 30 sec. (when AJ-5P33MP is used) SDC905 Rewinding time: Approx. 1 min. 30 sec. (when AJ-P66MP is used) Approx. 1 min. 30 sec. (when AJ-5P33MP is used) SDC905 [CONNECTOR SECTION] Audio Input Connectors AUDIO IN CH1/CH2 (XLR a2, 3 pins): LINE/MIC/MIC + 48 V switching type LINE: +4 dBu (0 or +4 dBu, selected on menu) MIC: -60 dBu (-60 or -50 dBu, selected on menu) MIC + 48 V: Phantom power supply + 48 V supported, -60 dBu (-60 or -50 dBu, selected on menu) MIC IN (XLR, 3 pins): Phantom + 48 V: ON or OFF, 3 kΩ, balanced, -50 or -40 dBu, selected on menu WIRELESS IN (25 pins): D-SUB, -40 dBu Time Code Input Connector TC IN (BNC): 0.5 to 8 Vp-p, high impedance Time Code Output Connector TC OUT (BNC): 2.0 Vp-p, low impedance Other Connectors DC IN (XLR, 4 pins, male): DC 12 V (DC 11 to 17 V) DC OUT (4 pins): DC 12 V (DC 11 to 17 V), max. 1 A PHONE OUT (stereo mini jacks a2) LENS (multi 12 pins) EVF (multi 20 pins) GPS (6 pins, connector used for AJ-GPS900G) ECU (6 pins, connector used for AJ-EC3P) DVCPRO (6 pins): Compliant with IEEE 1394 [ACCESSORIES] Shoulder strap Control knob Screw (M2a6 mm) (XYNZ + J6FZ) a1 Audio Output Connectors AUDIO OUT CH1/CH2 (XLR, 5 pins): +4 dBu (0 or +4 dBu, selected on menu, balanced low impedance) Earphone (stereo mini jacks a2) Video Input Connector GEN LOCK IN (BNC): 1.0 Vp-p, 75Ω Video Output Connector MON OUT (BNC): 1.0 Vp-p, 75Ω VIDEO OUT (BNC): 1.0 Vp-p, 75Ω 106