Panasonic SDC615 AJSDC615 User Guide - Page 33

Chapter 4 Adjustments and settings for recording 4-5-2 Setting the internal clock's date and time 1 Set the DISPLAY switch to UB. 2 Press the HOLD button to cause DATE to be displayed in the display window. 3 Set the TCG switch to SET. 4 Set the date (year/month/day) using the SHIFT button, UP (+) button and DOWN (-) button. 5 Press the HOLD button to cause TIME to be displayed in the display window. 6 Set the time (hour/minutes/seconds) using the SHIFT button, UP (+) button and DOWN (-) button. 7 Set the TCG switch to F-RUN or R-RUN. The internal clock starts marking time as soon as the switch position is changed. 8 Press the HOLD button to cause TIME ZONE (difference from the world standard time) to be displayed in the display window. 9 Set the TCG switch to SET. 10 Set the time difference (hour/minutes) and whether it is ahead (no display) or behind ("-" display) the world standard time using the UP (+) button or DOWN (-) button. Example: When the time difference is 5 hours behind (New York) Set "05:00 -". The time zone is always stored along with the date and time in the memory as memo data. While referring to the table on the right, set whatever applies to the local time. 11 Set the TCG switch to F-RUN or R-RUN to fix the time zone. Time difference Region Time difference Region 00:00 Greenwich - 00:30 - 01:00 Azores - 01:30 - 02:00 Mid-Atlantic - 02:30 - 03:00 Buenos Aires - 03:30 New Foundland - 04:00 Halifax - 04:30 - 05:00 New York - 05:30 - 06:00 - 07:00 Chicago Denver - 06:30 - 07:30 4 - 08:00 Los Angeles - 08:30 - 09:00 Alaska - 09:30 Marquesas Islands - 10:00 Hawaii - 10:30 - 11:00 Midway Island - 11:30 - 12:00 Kwajalein + 11:30 Norfork Island + 13:00 + 10:30 Lord Howe Island + 12:00 New Zealand + 09:30 Darwin + 11:00 Solomon Islands + 08:30 + 10:00 Guam + 07:30 + 09:00 Tokyo + 06:30 Rangoon + 08:00 Beijing + 05:30 Bombay + 07:00 Bangkok + 04:30 Kabul + 06:00 Dhaka + 03:30 Tehran + 05:00 Islamabad + 02:30 + 04:00 Abu Dhabi + 01:30 + 03:00 Moscow + 00:30 + 02:00 Eastern Europe + 12:45 Chatham Island + 01:00 Central Europe ≥After the date has been set in step 4, the internal clock starts marking the time as soon as the switch position has been changed even when the TCG switch is set to F-RUN or R-RUN. To cancel the setting in the course of setting the date, time or time zone, set the TCG switch to F-RUN or R-RUN while holding down the SHIFT button. ≥ The clock is accurate to a monthly error of approximately +/30 seconds in the power OFF status. If a more accurate time reading is required, check the time and set it again when the power is turned on. When the AJ-GPS900G GPS unit is installed and the time can be received, the internal clock's time (local date/time) is kept accurate on the basis of the received time (world standard time) and time zone. If the date or time display has deviated from the local time, the time zone setting may be off. Check the time zone setting again. (There is no need to set the date and time again.) 33