Panasonic SDR-SW21 Sd Movie Camera - Multi Language - Page 104
AC adaptor, LCD monitor, Condensation, Keep the AC adaptor near both the AC outlet and the AC plug.
UPC - 037988982912
View all Panasonic SDR-SW21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
5 Others Cautions for use (cont.) AC adaptor ●Use the supplied AC adaptor. ●If the battery itself is too hot or too cold, it may take time to charge or it may not charge at all. ●Keep the AC adaptor at least 1 m (3.3 feet) away from the radio. (Interference may affect the radio.) ●During use, the AC adaptor may make noises internally, however, this is normal. ●After use, unplug the AC adaptor from its AC outlet. (Leaving it connected consumes 0.3 W [max.] of power.) ●Keep the terminals of the AC adaptor clean. Keep the AC adaptor near both the AC outlet and the AC plug. LCD monitor ●If the LCD monitor fogs up or becomes dirty, wipe it clean with a soft dry cloth. ●When the unit is extremely cold, the LCD monitor may be slightly dark immediately after turning the power on; however, the normal brightness is restored when internal temperature rises. The LCD monitor is made with high-precision technology; however, black spots may appear in displays or stuck pixels (red, blue or green) may occur. There is nothing wrong with the monitor. The LCD monitor pixels are controlled to a 99.99 % degree of accuracy; however, dead or stuck pixels may occur in the remaining 0.01 %. These pixel defects are not recorded in SD card images, therefore do not worry. Condensation ●If condensation adheres to the unit, the lens may fog and the unit and SD card may not function properly. Avoid sharp changes in temperature and humidity. ●Condensation may adhere in the following cases: • After summer rain showers or in humid places where the air is thick with steam • When heaters are turned on in cold rooms • When moving from cold places to warm places • When the unit is directly exposed to cold drafts (i.e., air-conditioners, etc.) ●In the event of differences in temperature or humidity, place the unit in a plastic bag, remove as much air as possible, seal and let it sit for about 1 hour to adjust to the ambient temperature. ●If the lens fogs up, remove the battery and disconnect the AC adaptor, open the card/battery door and let it sit for about 1 hour to adjust to the ambient temperature. 104 VQT2A17