Panasonic SL-1500 Owners Manual - Page 12

Connections and installation  Do not simultaneously connect both the PHONO terminal output and external output terminals to a connected device (pre-main amplifier, component system, etc.). Connecting simultaneously may cause noise and/or popping sound.  Turn off all units and disconnect the AC power supply cord from the socket before making any connections.  Do not operate the external output switch and connect or disconnect cables with the unit turned on.  When connecting the PHONO output terminals, be sure to connect the PHONO earth lead. Otherwise, mains hum (buzzing noise) may occur.  Refer also to the instruction manual of the connected device. Connecting to an integrated amplifier or component system Connecting the external output terminals 1 Turn off the unit and the connected device, and disconnect the AC power supply cord from the socket. 2 Connect the PHONO cable to the external output terminals of the unit and the external input terminals of the connected device.  When connecting the external output terminals, do not connect the PHONO earth lead.  Connecting to the PHONO input terminals of the connected device produces abnormal output, loud and with distorted sound quality. 3 Set the external output switch to "ON". 4 Connect the AC power supply cord.  Confirm the wattage of the AC outlet on the connected equipment before using it for this unit. For the power consumption of this unit, see the specifications. ( 23) Back of main unit ロ ロ External output switch AC power supply cord ン Make settings with the unit turned off. Insert the AC power supply cord up to a point just before the round hole. To a household mains socket ロ ワ ン モ LINE OUT R L PHONO cable R L External input (AUX) 12 (12) English Amplifier (not included)