Panasonic SL-1500 Owners Manual - Page 13

Getting started Connecting the PHONO output terminals 1 Turn off the unit and the connected device, and disconnect the AC power supply cord from the socket. 2 Connect the PHONO cable and PHONO earth lead to the PHONO input terminals of the connected equipment.  Adequate volume and sound quality cannot be obtained when connected to the external input terminals of the connected device. 3 Set the external output switch to "OFF". 4 Connect the AC power supply cord.  Confirm the wattage of the AC outlet on the connected equipment before using it for this unit. For the power consumption of this unit, see the specifications. ( 23) PHONO OUT ロ ヰ ン R L PHONO PHONO earth lead cable R L PHONO EARTH PHONO Back of main unit ロ ロ External output switch AC power supply cord ン Make settings with the unit turned off. Insert the AC power supply cord up to a point just before the round hole. To a household mains socket Amplifier (not included) Attention  Tighten the PHONO earth terminal using a Phillips head screwdriver. Note  Although the AC power switch is in the "OFF" position, the unit is not completely disconnected from the mains. Remove the plug from the main electrical outlet if you will not be using the unit for an extended period of time. Place the unit so the plug can be easily removed. 13 (13) English