Panasonic SL-1500 Owners Manual - Page 19

3 Lift the cue lever and move the tone arm over the record. Cue lever 4 Lower the cue lever slowly. The tone arm moves down slowly. Play starts. To temporarily stop play Lift the cue lever.  The stylus lifts off the record.  To start play again, lower the cue lever. When play finishes After lifting the cue lever to return the tone arm to the arm rest, lower it completely. Press [START-STOP]. The electronic brake gently stops the turntable. Press [ ] to turn the unit off. Clamp the tone arm with the arm clamp. Put the stylus cover back on (to protect the stylus tip). Auto lift-up function This function automatically lifts up the tone arm after a record finishes playing. It prevents the last groove from playing back repeatedly. (It does not stop the turntable rotation.) This function requires the following setting to become active. Setting: With the unit turned off, set the auto lift-up switch on the rear side to "ON".  After an auto lift-up, be sure to perform the steps  to  described above in "When play finishes". Attention  Depending on the record, it may take some time after the play finishes for the auto liftup to operate, or it may operate while the record is still playing. If the tone arm is lifted during play, set the auto lift-up switch to "OFF".  The auto lift-up function may not operate normally. For the auto lift-up function to operate normally, the cue lever must be completely lowered after the tone arm is returned to the arm rest following the end of play. ロ ロ Auto lift-up switch ヰヶヵ When playing EP records  Press the speed select button [45] ([45] lights).  Fit the EP record adaptor over the center spindle. When playing SP (78 rpm) records  Press the speed select buttons [33] and [45] at the same time (78 rpm: [33] and [45] light). When using a record stabilizer (not included)  See the instruction manual of the record stabilizer.  Maximum weight: 1 kg 19 (19) English Playing back