Panasonic SL1200M3D SL1200M3D User Guide - Page 10
Adjustments while using the unit, Pitch control, Armlift height
View all Panasonic SL1200M3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Adjustments while using the unit -8 6 4 2 2 4 6 reset +8 pitch ad j . on power +6 ɹ3.3 ɹ0ɹ % - 3.3 off 8~13mm LED indicator Reset button Strobe illuminator +6 % variation +3.3 % variation Normal turntable speed _3.3 % variation Armlift screw Armlift Pitch control Fine adjustment to the number of revolutions per minute. Slide [pitch adj.] while the turntable is revolving. Move the indicator to the required position. •The numbers represent approximate percentages. •Pitch can be adjusted between -8% to +8%. To reset pitch to the preset value Press [reset]. The green lamp lights and the pitch immediately returns to the set value (33 1/3 or 45 rpm), regardless of any adjustments made with [pitch adj.]. Press [reset] again and pitch returns to the adjusted value. To measure pitch The four rows of metal circles around the edge of the turntable can assist you in measuring pitch. They are lit by the strobo light as they pass and each row appears to stand still at a different pitch. Avoid using fluorescent light while measuring pitch. The timing will be put out and accuracy will be affected. Armlift height Preparation Put a record on the turntable. Take off the stylus cover and release the arm clamp. Use a screwdriver to turn the armlift screw. Make this adjustment only if the cartridge you are using makes it necessary. •Turning the screw clockwise lowers the armlift. •Turning the screw anti-clockwise raises the armlift. Armlift height (the distance between the record and stylus when the cue lever is raised) is set to between 8 and 13 millimeters at time of shipment. 10 RQT4912