Panasonic SL1200M3D SL1200M3D User Guide - Page 5
Putting the player together, Fit the turntable, and turntable mat, Attach the head shell
View all Panasonic SL1200M3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Locking nut Putting the player together Magnet Securing screws Put the player together in the following order. •Do not connect the AC power cord until set up is complete. •Leave the dust cover off until set up and adjustments are com- plete. Fit the turntable and turntable mat . Put the turntable on the center spindle and then lay the mat on top. •Be very careful when putting the turntable on the main unit. The magnet on the bottom of the turntable is finely adjusted and sharp contact can cause it to move and lead to poor operation. Ensure the magnet remains free from dust and iron particles. •Do not adjust the screws attaching the magnet to the turntable. The rated performance of the unit cannot be guaranteed if the magnet is moved. Attach the head shell . Fit the head shell into the tone arm, keep it horizontal and tighten the locking nut. Attach the balance weight to the rear of the tone arm. If the cartridge weighs between 10 and 13 grams, attach the included auxiliary weight to the main balance weight. When the player is to be used for scratch play Use the disc slip sheet instead of the turntable mat. This enables the record to be easily moved during play. •Top (printed side): Lay the record on this side. •Bottom: Slippery side. For a different kind of slip Put the transparent sheet under the disc slip sheet. 5 RQT4912