Panasonic SL1200M3D SL1200M3D User Guide - Page 7
Preparatory adjustments, Horizontal balance and stylus pressure
View all Panasonic SL1200M3D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
;;Arm clamp 1 Arm rest 2 0 3 YES NO NO Balanced Too far forward Too far back Cue lever Anti-skating control Preparatory adjustments Horizontal balance and stylus pressure Release the tone arm. Take care with the stylus and remove its cover, then release the arm clamp. Free the tone arm from the arm rest. Adjust horizontal balance Push the cue lever down. Turn the anti-skating control to "0". Turn the balance weight until the arm is approximately horizontal. Take care at this time not to allow the stylus to touch the unit. Turn the stylus pressure control to "0" Return the tone arm to the arm rest and fix it with the arm clamp. Turn the stylus pressure control to "0". Hold the balance weight still while doing this. Adjust stylus pressure Turn the balance weight to adjust to the appropriate pressure for the cartridge you are using. See the cartridge's instructions for recommended stylus pressure. The stylus pressure control will turn at the same time. Stop when the center line points to the required pressure. To increase stylus pressure for scratch play Use the stylus weight (included) to increase stylus pressure by 4 grams. Balance weight Stylus pressure control "0" Center line 3.5 0 Arm clamp Turn stylus pressure control 1.5 0 1 Center line 2 2.5 3 Turn balance weight Stylus weight Shell with stylus weight 7 RQT4912