Panasonic SU-G700 Owners Manual - Page 27

Firmware updates

Page 27 highlights

English Firmware updates "F/W Update" Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge. • For the update information, refer to the following website. www.technics.com/support/firmware/ Downloading takes approx. 3 minutes. Do not disconnect the AC power supply cord or turn this unit to standby while updating. Do not disconnect the USB flash memory while updating. • The progress is displayed as "Updating %" while updating. (" " stands for a number.) Note • During the update process, no other operations can be performed. • If there are no updates, "Firmware is Up To Date" is displayed. (No need to update it.) • Updating the firmware may reset the settings of this unit. Firmware updates ■ Preparation • Download the latest firmware on the USB flash memory. For details, refer to the following website. www.technics.com/support/firmware/ 1 Connect the USB flash memory with new firmware. 2 Press [AMP]. 3 Press [SETUP]. 4 Press [ ], [ ] repeatedly to select "F/W Update" and then press [OK]. 5 Press [ ], [ ] to select "Yes" and then press [OK]. • The progress is displayed as "Updating %" while updating. (" " stands for a number.) • When the update has finished successfully, "Success" is displayed. 6 Disconnect the AC power supply cord and USB flash memory, and reconnect it after 3 minutes. Note • Downloading may take longer depending on the USB flash memory. • Use a USB flash memory with FAT16 or FAT32 format. • UPDATE terminal is used only for firmware updating. Do not connect any USB device other than the USB flash memory for firmware updating. • No USB device can be charged from the UPDATE terminal of this unit. Settings (27) 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

27
English
Firmware updates
Settings
(27)
Firmware updates
“F/W Update”
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
For the update information, refer to the
following website.
www.technics.com/support/firmware/
Downloading takes approx. 3 minutes.
Do not disconnect the AC power supply
cord or turn this unit to standby while
updating.
Do not disconnect the USB flash memory
while updating.
The progress is displayed as “Updating
%”
while updating. (“
” stands for a number.)
Note
During the update process, no other operations
can be performed.
If there are no updates, “Firmware is Up To
Date” is displayed. (No need to update it.)
Updating the firmware may reset the settings
of this unit.
Preparation
Download the latest firmware on the USB flash
memory. For details, refer to the following
website.
www.technics.com/support/firmware/
1
Connect the USB flash memory with
new firmware.
2
Press [AMP].
3
Press [SETUP].
4
Press [
], [
] repeatedly to select
“F/W Update” and then press [OK].
5
Press [
], [
] to select “Yes” and then
press [OK].
The progress is displayed as “Updating
%”
while updating. (“
stands for a number.)
When the update has finished successfully,
“Success” is displayed.
6
Disconnect the AC power supply cord
and USB flash memory, and reconnect
it after 3 minutes.
Note
Downloading may take longer depending on
the USB flash memory.
Use a USB flash memory with FAT16 or FAT32
format.
UPDATE terminal is used only for firmware
updating. Do not connect any USB device
other than the USB flash memory for firmware
updating.
No USB device can be charged from the
UPDATE terminal of this unit.