Panasonic TH-50PZ80 Operating Instructions - Page 40
Technical Information
View all Panasonic TH-50PZ80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Technical Information Closed Caption (CC) For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM, or 4:3; characters might be cut off). The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On using the Component or HDMI connection to the TV. If the CC is set On both the receiver and TV when the signal is 480i (except for the HDMI connection), the CC may overlap on the TV. If a digital program is being output in analog format, the CC data will also be output in analog format. If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output monitor. Aspect Ratio (FORMAT) Press the FORMAT button to cycle through the aspect modes, This lets you choose the aspect depending on the format of the received signal and your preference. (p. 17) (e.g.: in case of 4:3 image) FULL JUST FULL JUST Enlarges the 4:3 image horizontally to the screen's side edges. (Recommended for anamorphic picture) H-FILL Stretches to justify the 4:3 image to the four corners of the screen. (Recommended for normal TV broadcast) 4:3 H-FILL Side bar Enlarges the 4:3 image horizontally to the screen's side edges. The side edges of the image are cut off. ZOOM ZOOM Standard (Note that "Image retention" of the side bar may occur from displaying it for a long time.) Note 480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9): FULL, JUST, 4:3 or ZOOM 1080p / 1080i / 720p: FULL, H-FILL, JUST, 4:3 or ZOOM Enlarges the 4:3 image to the entire screen. (Recommended for Letter Box) Zoom adjust Vertical image position and size can be adjusted in "ZOOM". Select "Zoom adjust" on the "Picture" menu. (p. 22-23) V-position: Vertical position adjustment V-size: Vertical size adjustment To reset the aspect ratio (OK) 40