Panasonic TH-55LFE8U Professional Display for Simple Entry-Level Digital Signage - Page 23

Identifying Controls Main Unit INPUT MENU + - ENTER 65-inch model 43/48/55-inch models Ɣ The power indicator and remote control sensor can be taken in and out by sliding the lever on the rear panel. Ɣ It is also possible to store the part by pushing it directly. Note Ɣ For normal use, pull out the power indicator and remote control sensor from the edge side of the main unit by operating the lever on the rear panel. Depending on the setup condition such as when using the multi display, store them in the main unit. 1 Power Indicator / Remote control sensor The Power Indicator will light. When the power of the unit is ON (Main Power On / Off switch: ON) Ɣ Picture is displayed: Green Ɣ Power OFF (Standby) with remote control: Red When [Network control] is set to [On] (see page 55) : Orange (Red/Green) Ɣ Power OFF with "Power management" function: Orange (Red/Green) "Power management" function (see page 51) When the power of the unit is OFF (Main Power On Off switch: OFF): No light Note The unit will still consume some power as long as the power cord is still inserted into the wall outlet. When the power indicator is orange, power consumption during standby is generally larger than that of when the power indicator is red. 1 External Input Terminal Ɣ Connect to video equipment, PC, etc. (see page 15) 2 Ɣ Turns the power On / Off. 3 (INPUT signal selection) Ɣ Selects the connected device. (see page 27) 4 Ɣ Each time the button is pressed, the menu screen will switch. (see page 36) 5 / Ɣ Volume Up "+" Down "-" Ɣ Adjusts the volume. Also, switches the settings or adjusts the level on the main screen. (see page 28, 36) 6 Ÿ8QLW !ź8QLW ! Ɣ Selects the setting item. (see page 36) 7 Ɣ Configures the item on menu screen. (see page 36) Ɣ Switches aspect mode. (see page 29) English 23