Panasonic TH-55LFE8U Professional Display for Simple Entry-Level Digital Signage - Page 52
Wobbling, No activity power off, OSD language
View all Panasonic TH-55LFE8U Professional Display for Simple Entry-Level Digital Signage manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
[DVI-D power management] When this function is set to [On], it operates under the following conditions to turn the power on or off automatically. When no pictures (sync signal) are detected for 60 or so seconds at DVI-D input: Power is turned off (standby); the power indicator lights up orange. When pictures (sync signal) are subsequently detected: Power is turned on; the power indicator lights up green. [PC power management] (DPMS function) When this function is set to [On], it operates under the following conditions to turn the power on or off automatically. When no pictures (HD/VD sync signals) are detected for 60 or so seconds at PC input: Power is turned off (standby); the power indicator lights up orange. When pictures (HD/VD sync signals) are subsequently detected: Power is turned on; the power indicator lights up green. Note Ɣ This function is effective when [Sync] in [Signal] is set to [Auto] or [HV sync] and during normal viewing and [Component/RGB-in select] is set to [RGB]. (see page 48) [Power save] This function adjusts the brightness of the backlight to reduce power consumption. [Off]: This function does not operate. [On]: Backlight brightness is reduced. Note Ɣ If [Input search] is set to items other than [Off], the [Input search] function is prioritised. (The power management function does not operate for each terminal.) (For details of [Input search] function, see page 59.) Wobbling Automatically shifts the display image (therefore unnoticeable to the eye) to prevent image retention of sharper contour of image. Setting this to [On] moves the screen position at certain intervals and displays the images. Note Ɣ If [Multi display setting] is set to [On], this function does not operate. (see page 53) Ɣ When this function is operating, part of the screen may appear to be missing No activity power off When this function is set to [Enable], the power is turned off (standby) automatically when there is no operation of the Display for 4 hours. Starting from 3 minutes before the turn off, the remaining time will be displayed. Press any key to abort. No activity power off 3 min When the power is turned off due to this function, a message [Last turn off due to 'No activity power off'.] is displayed next time the power is turned on. Note Ɣ During the screensaver is running, this function is disabled. OSD language Select your preferred language. Selectable languages English(UK) Deutsch Français Italiano Español ENGLISH(US : Chinese : Japanese : Russian 52 English