Panasonic TH-L32C10 User Manual - Page 45

HDMI connection HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and highquality sound by connecting the TV and the equipment. HDMI-compatible equipment (*1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, can be connected to the HDMI terminal using an HDMI compliant (fully wired) cable. About connections, see "External Equipment" (p. 40). HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard. If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (*2). When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal (HDMI1 : use AV2 IN AUDIO terminal). Audio settings can be made on the "HDMI1 Input" (or "HDMI Input" for TH-L32C12K) menu screen. (p. 20) Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz HDMI2 terminal is for digital audio signal only and is not available for TH-L32C12K. Use with a PC is not guaranteed. Only HDMI video formats indicated in the HDMI table (p. 46) are applicable. If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9". These HDMI connectors are "type A". These HDMI connectors are compatible with HDCP (High-Bandwidth Digital Content Protection) copyright protection. An equipment having no digital output terminal may be connected to the input terminal of either "COMPONENT" or "VIDEO" to receive analogue signals. The HDMI input terminal can be used with only the following image signals: 480i, 480p, 576i, 576p, 720p, 1080i and 1080p. Match the output setting of the digital equipment. For details of the applicable HDMI signals, see p. 46. (*1): The HDMI logo is displayed on HDMI-compliant equipment. (*2): Enquire at your local digital equipment retailer shop. PC connection A PC may be connected to this TV so that the PC screen is displayed and sound is heard from the TV. PC signals that can be input: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency 59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image). A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector. Note Some PC models cannot be connected to this TV. When using PC, set the colour display quality of PC to the highest position. For details of the applicable PC signals, see page 46. Max. display resolution 4:3 Aspect 16:9 1,024 x 768 pixels 1,366 x 768 pixels Technical Technical Information D-sub 15-pin connector signal 5 4 3 2 1 10 9 8 7 6 15 14 13 12 11 Pin No. Signal Name R G B NC (not connected) GND (Ground) Pin No. Signal Name GND (Ground) GND (Ground) GND (Ground) NC (not connected) GND (Ground) Pin No. Signal Name NC (not connected) NC (not connected) HD VD NC (not connected) 45