Panasonic TH42PH10UKA 42" Plasma Television - Page 38

SET UP for Input Signals SYNC Select SIGNAL from the "SET UP" menu during RGB input signal. 1 Press to adjust. 2 Press to exit from adjust mode. Setting RGB sync signal Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal). AUTO: The H and V sync or synchronized signal are automatically selected. If both input, it is selected the H and V sync. ON G: Uses a synchronized signal on the Video G signal, which is input from the G connector. VBS: Uses a synchronized signal of Composite Sync input, which is input from the HD connector. SET UP 1/2 SIGNAL COMPONENT/RGB-IN SELECT RGB INPUT LABEL PC POWER SAVE OFF STANDBY SAVE OFF POWER MANAGEMENT OFF AUTO POWER OFF OSD LANGUAGE OFF ENGLISH (US) Press ACTION ( ) button SIGNAL [ RGB ] SYNC 3 : 2 PULLDOWN VIDEO NR H-FREQ. 33.8 V-FREQ. 60.0 AUTO OFF OFF kHz Hz SYNC AUTO SYNC ON G SYNC VBS REFRESH RATE This function sets the refresh rate of the display. This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate. 100 Hz: Reduce screen flicker. 50 Hz: Enhance the resolution of moving images. Note: It is recommended to set to 100 Hz normally. 1 Press to select REFRESH RATE. SIGNAL 3D Y/C FILTER (NTSC) Press to adjust. COLOR SYSTEM 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) VIDEO NR REFRESH RATE [ VIDEO ] AUTO OFF NORMAL OFF 100 Hz SIGNAL [ COMPONENT ] SIGNAL [ RGB ] SYNC 3 : 2 PULLDOWN VIDEO NR REFRESH RATE H-FREQ. 33.8 V-FREQ. 60.0 AUTO OFF OFF 100 Hz kHz Hz SIGNAL [ Digital ] 3 : 2 PULLDOWN OFF 3 : 2 PULLDOWN OFF 2 VIDEO NR Press to exit from adjust mode. REFRESH RATE OFF 100 Hz VIDEO NR REFRESH RATE OFF 100 Hz H-FREQ. 33.8 kHz V-FREQ. 60.0 Hz H-FREQ. (kHz) / V-FREQ. (Hz) Displays the H (Horizontal) / V (Vertical) frequencies. This display is valid only for RGB/PC and Digital input signal. Display range: Horizontal 15 - 110 kHz Vertical 48 - 120 Hz 38 H-FREQ. 33.8 kHz V-FREQ. 60.0 Hz