Panasonic TH42PH10UKA 42" Plasma Television - Page 41
Studio W/B, Initial Power - tv
UPC - 037988241750
View all Panasonic TH42PH10UKA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Options Adjustments Options Off-timer function Initial Power Mode ID select Remote ID Serial ID Display size Studio W/B Studio Gain 2/3 Enable Normal 0 Off Off Off Off Off Item Off-timer function Effect Adjustments Enable: Enables the "Off-timer function". Enable Disable Disable: Note: Disables the "Off-timer function". When "Disable" is set, the Off-timer is cancelled. Initial Power Mode Normal Standby On Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again. Normal: Power returns in as the same state as before the power interruption. Standby: Power returns in standby mode. (Power Indicator : red/orange) On: Power returns in power On. (Power Indicator : green) Note: When using multiple displays, "Standby" is preferred to be set in order to reduce a power load. ID select Sets panel ID number when panel is used in "Remote ID" or "Serial ID". Set value range: 0 - 100 (Standard value: 0) Remote ID Off Off: Disables ID remote control functions. You can use normal remote control operations. On On: Enable ID remote control functions. Serial ID Sets the panel ID Control. Off: Disables external control by the ID. Off On On: Enables the external control by the ID. Adjusts the image display size on screen. Off: Sets the normal image display size on screen. On: Sets the image display size approximately 95 % of the normal image display. Off On Display size Notes: Off On • This setting is valid only when the input signals are as follows; NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (BNC Dual Video Terminal Board (TY-FB9BD)) 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI) • This setting is invalid when two screen display, digital zoom or Multi screen is selected. • When "Display size" is set to "On", "POS. /SIZE" adjustment cannot be used. • Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals. Off: Nullify all the settings adjusted. Studio W/B Off On: Sets the color temperature for TV studio. On Note: Valid only when the low is set as color temperature on screen adjustment. Sharpens the contrast for a better view when a part of the image is too light to see. Off: Disables "Studio Gain". Studio Gain Off On: Enables "Studio Gain". On Note: This setting is valid only when the input signals are as follows: Component Video, RGB (analog), SDI, HDMI 41