Panasonic TH50PHD6 42" Plasma Tv - Page 23

PICTURE Adjustments Item Effect Adjustments PICTURE Less BRIGHTNESS Darker More Brighter Adjusts the proper picture contrast. Adjusts for easier viewing of dark pictures such as night scenes and black hair. COLOR Adjusts color saturation. Less More TINT Adjust for natural flesh tones. Reddish Greenish SHARPNESS Less Adjusts picture sharpness. More Notes: (1) "COLOR" and "TINT" settings cannot be adjusted for "RGB/PC" and "DVI" input signal. (2) You can change the level of each function (PICTURE, BRIGHTNESS, COLOR, TINT, SHARPNESS) for each PICTURE menu. (3) The setting details for STANDARD, DYNAMIC and CINEMA respectively are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN). (4) The "TINT" setting can be adjusted for NTSC signal only during "VIDEO (S VIDEO)" input signal. Note: In PICTURE, there is nor a noticeable change even when contrast is increased with a bright picture or reduced with a dark picture. ADVANCED SETTINGS Item BLACK EXTENSION INPUT LEVEL W/B HIGH R W/B HIGH B W/B LOW R W/B LOW B GAMMA AGC Effect Less More Less Less Less Less Less Down OFF More More More More More Up ON Details Adjusts the dark shades of the image in gradiation. (This cannot be adjusted when the input signal is RGB or DVI.) Adjustment of parts which are extremely bright and hard to see. Adjusts the white balance for light red areas. Adjusts the white balance for light blue areas. Adjusts the white balance for dark red areas. Adjusts the white balance for dark blue areas. S CURVE 2.0 2.2 2.5 Increases the brightness of dark signal automatically. Notes: (1) Carry out "W/B" adjustment as follows. A Adjust the white balance of the bright sections using the "W/B HIGH R" and "W/B HIGH B" settings. B Adjust the white balance of the dark sections using the "W/B LOW R" and "W/B LOW B" settings. C Repeat steps A and B to adjust. Steps A and B affect each other's settings, so repeat each step in turn to make the adjustment. (2) The adjustment values are memorized separately for each input mode (INPUT1, INPUT2 , INPUT3 and PC IN). (3) The adjustment range values should be used as an adjustment reference. Helpful Hint ( N / NORMALIZE Normalization) On the remote control unit, while the "ADVANCED SETTINGS" menu is displayed, if either the N button is pressed at any time or the (ACTION button) is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings. 23