Panasonic WJ-PR204 Operating Instructions - Page 26
Mounting the receiver side unit to a Rack
View all Panasonic WJ-PR204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3 Mounting the Unit 3.2 Mounting the receiver side unit to a Rack By using the Rack Mount Connecting Fitting (locally procured), 3 or 4 connected receiver side units can be mounted to a rack. Prepare the Rack Mount Connecting Fitting (BY-HCA10A), which includes the following items. - Mounting bracket (2 pcs.) - Underside continuous connecting bracket (2 pcs.) - Screw (Flat-head M3´6 mm {1/4 inches}: 32 pcs.) - Screw (M3´6 mm {1/4 inches}: 6 pcs.) IMPORTANT • Make sure to use the screws included with the BY-HCA10A. • The part number differs depending on where the rack mount connecting fitting was purchased. - For U.S. and Canada: BY-HCA10A - For Europe and other countries: BY-HCA10CE Mounting 3 or 4 receiver side units to a rack 1. Connect the receiver side units together using the BY-HCA10A underside continuous connecting bracket with the screws included with the BY-HCA10A. • Connecting 3 receiver side units Place a receiver side unit on both ends of the underside continuous connecting brackets. (Recommended torque 0.7±0.3 N·m {0.52±0.22 lbf·ft}) Flat-head (M3×6 mm {1/4 inches}: Rack mount connecting fitting (accessory)) × 12 Underside continuous connecting bracket (Rack mount connecting fitting (accessory)) 26 Operating Instructions