Panasonic WJ-PR204 Operating Instructions - Page 28
Screw, mm {1/4 inches}, Rack mount connecting, fitting accessory, Mounting bracket
View all Panasonic WJ-PR204 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
3 Mounting the Unit 2. Secure the mounting brackets of the BY-HCA10A to both sides of the connected receiver side units with the screws included with the BY-HCA10A. (Recommended torque 0.7±0.3 N·m {0.52±0.22 lbf·ft}) Screw (M3×6 mm {1/4 inches}: Rack mount connecting fitting (accessory)) × 2 Screw (M3×6 mm {1/4 inches}: Rack mount connecting fitting (accessory)) × 2 Mounting bracket (Rack mount connecting fitting (accessory)) Mounting bracket (Rack mount connecting fitting (accessory)) Note • The BY-HCA10A rack mount bracket comes with 6 screws (M3´6 mm {1/4 inches}). Use 4 screws (M3´6 mm {1/4 inches}) when mounting to sides of the connected receiver side units. Keep the remaining parts. 28 Operating Instructions
2.
Secure the mounting brackets of the BY-HCA10A to both sides of the connected
receiver side units with the screws included with the BY-HCA10A.
(Recommended torque 0.7±0.3 N·m {0.52±0.22 lbf·ft})
Screw
(M3
×
6 mm {1/4 inches}:
Rack mount connecting
fitting (accessory))
×
2
Mounting bracket
(Rack mount connecting
fitting (accessory))
Mounting bracket
(Rack mount connecting fitting (accessory))
Screw
(M3
×
6 mm {1/4 inches}:
Rack mount connecting
fitting (accessory))
×
2
Note
•
The BY-HCA10A rack mount bracket comes with 6 screws (M3
´
6 mm
{1/4 inches}). Use 4 screws (M3
´
6 mm {1/4 inches}) when mounting to sides
of the connected receiver side units. Keep the remaining parts.
28
Operating Instructions
3 Mounting the Unit