Panasonic WV-NS202 Network Camera - Page 54
Con the settings relating to the authentication [Authentication setup]
UPC - 791871505458
View all Panasonic WV-NS202 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Configure the settings relating to the authentication [Authentication setup] The settings relating to the authentication such as users and PCs restrictions for accessing the camera can be configured on this page. The "Authentication setup" page has 2 tabs of the [User] tab and the [Host] tab. Configure the settings relating to the user authentication [User] Click the [User] tab on the "Authentication setup" page. ( page 15) The settings relating to the user authentication can be configured on this page. Up to 16 users can be registered. Note: When user authentication (authentication error) has failed to pass 8 times within 30 seconds using the same IP address (PC), access to the camera will be denied for a while. Note: When the user name already in use is entered and the [SET] button is clicked, the respective user information will be overwritten. [User authentication] Select "ON" or "OFF" to determine whether or not to authenticate the users. Default: OFF [User name] Enter a user name. Number of characters for the user name: 1 - 32 char- acters Default: None (blank) [Password] [Retype password] Enter the password. Number of characters for the password: 4 - 32 char- acters Default: None (blank) [Access level] Select the access level of the user from the following. 1. Administrator: Allowed all available operations of the camera. 2. Camera control: Allowed to display images from the camera and to control the camera. The camera setting configuration is unavailable. 3. Live only: Only displaying live images is available. The camera setting configuration and camera control are unavailable. Default: 3. Live only Note: By clicking [i] of "User name check", the registered user can be selected and the selected user's information can be checked. The registered user will be displayed with the access level. (Example: admin [1]) To delete the registered user, click the [DEL] button after selecting the user to be deleted. Important: If all users whose access level is "1. Administrator" are deleted, it will be impossible to configure the settings. 54