Panasonic WV-SW458 Operating Instructions - Page 124

12 Configure the multi-screen settings [Multi-screen] Example of entry: - Example when entering an IPv4 address: http://192.168.0.10:8080 - Example when entering an IPv6 address: http://[2001:db8:0:0:0:0:0:1]:8080 To access the cameras using the HTTPS protocol, enter as follows: Example of entry: https://192.168.0.10/ • Available number of characters: 1 - 128 characters • Default: (Cam. 1) selfcamera, (Cam. 2 - 16) not registered IMPORTANT • When accessing the camera using the HTTPS protocol, install the security certificate of the camera to display images on the monitor. (®page 169) • This camera is specified when "selfcamera" is displayed for the IP address or host name. Note • • When using the host name, it is necessary to configure the DNS settings of the PC to be used for the multi-screen display. Refer to the network administrator for information on the DNS setting of PCs. BB-HCM series cameras can register to the multi-screen and display their images there. [Camera title] Enter the title of the camera. The entered camera title will be displayed on a multi-screen. • Available number of characters: 0 - 20 characters • Unavailable characters: " & • Default: - (Cam. 1) Varies as follows depending on the model in use. WV-SW458 SW458 /WV-SF438 SF438 - (Cam. 2 - 16) None (blank) Note • • When selecting a 16 split-screen, some characters of the camera title to be displayed may not be displayed. Even if "16:9" aspect ratio (Panorama or Double Panorama) is set, a "4:3" image is displayed in the multi-screen. 124 Operating Instructions