Panasonic WV-SW458 Operating Instructions - Page 152

16 Configure the settings of the servers [Server] IMPORTANT • Use an NTP server when the more accurate time & date setting is required for the system operation. [Time adjustment] Select the time adjustment method from the following. Time adjusted by the selected method will be used as the standard time of the camera. • Manual: Time set on the [Basic] tab on the "Basic" page will be used as the standard time of the camera. • Synchronization with NTP server: Time automatically adjusted by synchronizing with the NTP server will be used as the standard time of the camera. • Default: Manual [NTP server address setting] When "Synchronization with NTP server" is selected for "Time adjustment", select the method of how to obtain the NTP server address from the following. • Auto: Obtains the NTP server address from the DHCP server. • Manual: The NTP server address will be entered manually on "NTP server address". • Default: Manual IMPORTANT • When obtaining the NTP server address from the DHCP server, it is necessary to select "DHCP" or "Auto(AutoIP)" for "Network Settings" on the [Network] tab of the "Network" page. (®page 154) [NTP server address] When "Manual" is selected for "NTP server address setting", enter the IP address or the host name of the NTP server. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-). • Default: None (blank) IMPORTANT • When entering the host name for "NTP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network" page. (®page 154) [NTP port] Enter a port number of the NTP server. • Available port number: 1 - 65535 • Default: 123 The following port numbers are unavailable since they are already in use. 152 Operating Instructions