Panasonic WVCU161C WVCU161C User Guide - Page 14

s Connection with a Time Lapse VCR Alarm in/out and recover-reset in/out are connected between the time lapse VCR and the rear of the controller. Note: Use a relay as shown below when connecting an indicator such as a buzzer that exceeds 16 V DC 100 mA. Time Lapse VCR 12345 1 ALARM IN 2 COM 3 ALARM RESET IN 4 ALARM RECOVER OUT 5 ALARM OUT 4 3G21 ALARM IN 1 ALARM IN 2 ALARM OUT G GROUND 3 RECOVER IN 4 RESET OUT Relay NC NO NC: Normally Closed Contact NO: Normally Open Contact Alarm Indicator etc. +12 V s Cable-loss Compensation Setting The maximum allowable cable length between a camera and a controller is 900 m (3 000 ft) when using an RG-59U BELDEN or equivalent cable. Cable loss compensation can be adjusted in the setup menu as S, M or L. Camera 14 A m (A ft) WV-CU161C Cable length (with RG-59U BELDEN 9259 or equivalent) Unit: m (ft) Cable compensation parameter in WV-CU161C Setup menu 0 (0) ≤ A < 400 m (1 300 ft) → S 400 (1 300) ≤ A < 700 m (2 300 ft) → M 700 (2 300) ≤ A < 900 m (3 000 ft) → L