Panasonic WVCU161C WVCU161C User Guide - Page 26

OPERATING PROCEDURES CAMERA CONTROL FUNCTIONS Camera control functions are operable. It is necessary to set up the camera before using the camera control functions. For further information, refer to the Operating Instructions for the respective combination camera (See page 33). You can also set it up from the Camera Setup menu during operating the system. s Pan/Tilt Control A combination camera or an ordinary camera with pan/tilt head can be controlled. Move the pan/tilt head in the desired direction using the joystick. Joystick s Lens Control A motorized lens can be controlled. 1. Press the FOCUS NEAR or FOCUS FAR button to adjust the lens focus while watching the monitor. NEAR FAR FOCUS AUTO FOCUS If you are using a camera with an auto focus feature, then the lens focus can be automatically adjusted by simultaneously pressing the FOCUS NEAR and FOCUS FAR buttons. 2. Press the ZOOM TELE button to zoom in on the object or press the ZOOM WIDE button to zoom out from the scene. WIDE TELE ZOOM IRIS CLOSE OPEN IRIS RESET The focal length differs depending on the lens installed on the camera. 3. Press the SHIFT button. SHIFT To move the pan/tilt head slowly, move the joystick while holding down the SLOW/CAMERA FUNCTION button. Note: The SLOW/CAMERA FUNCTION button only works in combination with cameras or pan/tilt heads that are provided with more than 8-step speeds. 4. Press the ZOOM/IRIS buttons to adjust the lens iris while watching the monitor. If the IRIS CLOSE and IRIS OPEN buttons are simultaneously pressed for approximately 1 second or more, then the iris is reset to the default values. WIDE TELE ZOOM IRIS CLOSE OPEN IRIS RESET 26