Panasonic fv08vsl1 Installation Instructions - Page 4

SPECIFICATIONS Model Power consumption (W) Air direction Voltage Frequency (V) (Hz) Duct diameter (inches) Noise (sones) Fan body Lighting unit Speed Air deliver at 0.1"WG (rpm) (cfm) Fluorescent lamp Night lamp Weight Ib.(kg) FV-08VSL1 Exhaust 120 60 3 1.3 26 18 X 2 4 944 80 12.8 (5.8) FV-10VSL1 Exhaust 120 60 4 1.5 34 18 X 2 4 880 100 13 (5.9) Specifications are based on HVI standard. UNPACKING Unpack and carefully remove unit from carton. Refer to the Supplied Accessories list to verify that all parts are present. GENERAL SAFETY INFORMATION 1. Do not install this ventilating fan where Interior room temperature may exceed 104°F (40°C). 2. Make sure that the electric service supply voltage is 120 V, 60 Hz. 3. Follow all local electrical and safety codes, as well as the National Electrical Code (NEC) and the Occupation Safety and Health Act (OSHA). 4. Always disconnect the power source before working on or near the fan, motor, light fixture or junction box. 5. Protect the power cord from sharp edges, oil, grease, hot surfaces, chemicals or other objects. 6. Do not kink the power cord. 7. Do not install the unit where ducts are configured as shown in Fig. A. 8. Provide suction parts with proper ventilation. 9. This product has a fluorescent lamp that contains mercury. Disposal may be regulated in your community due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance:http://www.eiae.org OW Prohibition ow Prohibition 0 Prohibition Fig. A 0 Prohibition Adaptor 4