Panasonic ub5315 Assembly Instructions - Page 18

Wall-mounting ■ Attaching the wall-mounting fixtures The electronic board must be mounted with the method most suited to the material of the wall. Three methods are presented here. (Other options may be available in your area.) •Attaching to metal or concrete walls Stud plugs (sold in stores) are needed. Drill bit Metal or concrete wall Stud plug Drill four holes in the wall. For the correct hole size, refer to the instructions for the particular stud plugs used. ♦ .97 Insert a stud plug in each hole. Wall-mounting fixture Bolt •Attaching to plasterboard walls Split-wing toggles (sold in stores) are needed. Plasterboard Split wing toggle Wall-mounting fixture Bolt Arms Arms Insert each bolt through a hole in the wall-mounting fixture and tighten until the wall-mounting fixture is securely fixed to the wall. Insert each bolt through a hole in the wall-mounting fixture and into the hole in the wall beneath so that the arms of the splitwing toggle are horizontal. For the correct hole size, refer to the instructions for the particular split-wing toggles used. After the arms expand, pull the wall-mounting fixture out until the arms of the split-wing toggle grip firmly into the wall. Tighten each bolt until the wallmounting fixture is securely fixed to the wall. 54