Panasonic ub5315 Assembly Instructions - Page 4
protective
View all Panasonic ub5315 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Assembling the Electronic Board 3 Collapse the carton box. Remove the tape on the unopened side of the carton box, then collapse the box. Remove the tape. Top Bottom Carton 4 Remove the protective plastic bags. Remove the protective plastic bag from the screen unit and printer unit. Set those units on the top of collapsed shipping box and remove the cushions. Cushions Protective plastic bag 6 Hang the screen unit to the board attachment (upper). Hold the side covers of the screen unit and hang two hooks of the screen unit on the left side of the board attachment (upper). Shift the screen unit to the left until it stops. Confirm the left hook is inserted into the groove of the board attachment (upper). • When hanging the screen unit, set the board attachment frame at the lowest level. • Be careful not to catch the screen film on the board attachment frame. Cover (left) Board attachment (upper) Board attachment Frame Cover (right) Screen unit Cushions Caution • Touch the screen film surface gently to avoid any damage. 5 Attach the screen unit to the optional stand or wall mounting fixture. ■ If you are using the stand, refer to page 48. ■ If you are using the wall mounting fixture, refer to page 52. 40 7 Remove the shipping screws. Remove the upper and lower shipping screws on the folded screen. 40 Caution • Remove the lower shipping screw first..