Pantech Jest 2 Manual - English - Page 13
Using A Microsd, Battery Handling Information - jest 2006
View all Pantech Jest 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Correct Incorrect Correct Incorrect 3. To remove the Wall Charger, gently pull the charger from the device. • When you charge the battery with the handset powered off you will see a charging status screen. After the charging has completed, the Charge Complete message appears. You cannot operate the phone until it is powered on. To turn your phone on, press and hold the END/POWER Key until your display turns on. • The battery is not fully charged at the time of purchase. Fully charge the battery before use. • It is more efficient to charge the battery with the handset powered off. • Battery operating time gradually decreases over time. • If the battery fails to perform normally, you may need to replace the battery. 22 USING A microSDTM CARD A microSDTM card stores sounds, videos, images, photos, music, and other files. INSTALLING A microSDTM CARD To install your microSDTM card: 01 1. Remove the cover of micro SD Card Slot. 02 2. Press the microSDTM card into the slot with the gold contacts facing up. 03 3. Replace the cover of micro SD Card Slot. 04 REMOVING A microSDTM CARD 05 To remove the microSDTM card: 1. Remove the cover of micro SD Card Slot. 06 2. Gently push the exposed edge of the microSDTM card 07 with your fingertip to release it from the slot. 3. Remove the microSDTM card. 4. Replace the cover of micro SD Card Slot. BATTERY HANDLING INFORMATION CAUTIONS: T HERE IS A RISK OF EXPLOSION IF AN INCORRECT BATTERY IS USED. DISPOSE OF USED BATTERY ACCORDING TO LOCAL LAWS. DO'S • Only use the battery and charger approved for use with the JEST2. • Only use the battery for the system for which it is specified. • Only use or replace the battery with a charging system or another battery that has been qualified with the system per this standard, IEEE-Std-1725-2006. Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard. • Only use the battery for its original purpose. As an improper battery use may result in a fire, explosion or other hazard. • Try to keep batteries in a temperature between 36°F (0°C) and 95°F (35°C). If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using. 223