Pentax Espio 140V Espio 140V Manual - Page 3
d6ut.
View all Pentax Espio 140V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
4 3 u3 c 75 t13 15 • • iv du6kur#et.4L:meit ; ROO - O t t 6 0 7 :5 33 2 4 (03 275 YLOif I41BASIC OPERATION 1 Open the back cover. 2 Load the film. Pull out the film leader end to reach the [FILM • ] mark 0. If there is dirt on the film detector 0, the film cannot be wound properly. 3 Close the back cover. The film automatically advances to the first frame. If "E" blinks on the LCD panel, repeat step 1-3 to load the film properly. 4 Open the lens protector to turn the switch ON. 5 Adjust the focus frame in the middle of the viewfinder to optimum clarity by diopter adjustment lever. Compose your subject by using the zoom button and focus on the subject within the autofocus frame. 6 Press the shutter release button halfway down to confirm the focus with green lamp lights on, and press the shutter release button completely to take a picture.The flash automatically discharges in low light. 7 The film will be rewound automatically after you have exposed the last frame of the roll. 8 Unload the film after confirm "0" blinks on the LCD panel. • When the lens protector is opened, the lens slightly extends. • When the camera is left unused for 3 minutes with the power on, the zoom lens automatically retracts to 38 mm to prevent it from damage. • When the camera is unused for 5 minutes in the remote control mode, the zoom lens will be retracted to 38 mm position and cancel the remote control mode.