Pentax Espio 80V - EZY 80 Espio 80V - EZY 80 Manual - Page 7
Specifications
View all Pentax Espio 80V - EZY 80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
10. SPECIFICATIONS Type : 35mm fully automatic lens-shutter with built-in zoom lens and auto flash Film : 24 x 36 mm format, Auto film speed setting with 35mm perforated DX-coded film with ISO rating from 253200(1EV step). Non-DX coded films are set to ISO25 Film loading, Film winding : Auto film loading, Auto film winding (single-frame) Film rewinding : Auto film rewinding at the end of roll. Auto stop upon completion of rewinding, Rewinding in mid-roll provided. Lens : Pentax power zoom 38-80mm f/6.3.12.5, 5 elements in 5 groups Angle of view : 59'- 30.5' Focusing system : Pentax infrared active autofocus system with focus lock Focusing Range : 0.8m(2.6ft) - infinity, maximum magnification: approx. 0.11 x. Infinity-landscape mode(Focus is fixed to infinity). Zooming : Electronic zoom Shutter : Programmed AE electronic shutter with speed approx.1/300 - 2 sec. Self-timer : LED lamp indication. Delay time approx.10 sec. Viewfinder: Actual image zoom viewfinder. 83% of field of view ratio Magnification : 0.42 x (38mm WIDE) -0.78 x (80mm TELE), Diopter : -1.0 m Frames : Autofocus frame, Picture frame, Close distance correction frame Green lamp lighting(O) : Flash is charged. Green lamp blinking : Flash is being charged. Exposure control : Programmed auto-exposure control. Exposure Range : Auto or Daylight-Sync mode(ISO400) : EV10.5 - EV17.5 at 38mm WIDE, EV13.5-EV19.0 at 80mm TELE. Slow Shutter Speed mode(ISO 400): EV8.0 EV17.5 at 38mm WIDE, EV8.0 - EV19.0 at 80mm TELE. Flash : Built-in flash with red-eye reduction mode, Automatic flash emission in low-luminance, Flash ON.Day-light Sync/Slow Shutter Speed Sync(up to 2 sec.), Flash OFF=Flash override Flash recycling time : Approx. 7 sec. under Pentax testing conditions. Power source : One 3V lithium battery(CR123A or the equivalent), Auto power shut-off in 3 min. Battery life : Approx.15 rolls of 24-Exposure film when using flash 50% of the fime(under Pentax testing conditions) Battery exhaustion warning : ( Ci) appears on the LCD panel, Shutter is locked, when( p) is blinking. Size & Weight : 120.5(W) x 70.5(H) x 51.5(D) (4.7" x 2.8' x 2") 225g(7.9oz) without battery DATE MODEL Date mechanism : Crystal quartz controlled: LCD with digital clock, auto calendar up to 2049. Imprinting mode : "Year, Month and Dar, 'Day, Hour and Minutes ", " -- blank', "Month, Day and Year or 'Day, Month and Year. Size & Weight: 120.5 (W) x 70.5(H) x 53.0(D) mm (4.7" x 2.8" x 2.1") 230g(8.1oz) Without battery. SPECIFICATIONS ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTIFICATION OR ANY OBLIGATION ON THE PART OF THE MANUFACTURER. For Customers in USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Charges or modifications not approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates. uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does not cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Consult the dealer or an experienced radio/TV technician for help. For Customers in Canada This Class B digital apparatus meets all requirements of the Canadian InterferenceCausing Equipment Regulations.