Pentax IQZoom 110 IQZoom 110 Manual - Page 15

LAMP INDICATIONS r- ""1 0 CI 0 Notes: • If the subject is too close, the green lamp blinks. Adjust the camera-to-subject distance so that the green lamp lights continuously, then release the shutter. The shutter cannot be released while it is blinking. • If the subject is even closer, the green lamp may light continuously. In this case, keep in mind that the shutter will be released when the shutter release button is depressed fully. When you depress the shutter release button halfway down, the lamps 0, and/or lights up or blink as shown above. 0 Green lamp: When the subject is in focus, it will light up to indicate that you can take the picture; when the subject is not in focus, it will blink, indicating that you cannot take the picture because the camera-to-subject distance is too close. 0 Red lamp: When the flash is ready to discharge, it will light up. When the flash is being charged, it will blink. Infinity-landscape lamp: When the infinity-landscape mode is set, it will light up. 11