Pentax P3 P3 Manual - Page 28
Pentax P3 Manual
View all Pentax P3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ftm 0D 10 15 3 22ale"8"4#4" "8"18 in 22 16 11 8 5.6 4 2.8 When setting aperture first Set the aperture to your desired f-stop. Turn the shutter dial until the shutter-speed display changes from a blinking speed to a just glowing speed, namely, until only one shutter speed is seen, so that correct exposure can be obtained. If the display does not change from a blinking speed to a glowing speed even by turning the shutter dial, reset the aperture by turning the aperture ring. M M 500 --> 60 60 • 26 • Also in the case of Metered Manual mode, when the subject is too bright or dark, "1000" or "1" blinks as a warning. Adjust the shutter speed or the aperture to obtain correct exposure. When the subject is very dark and a shutter speed slower than 1/30 is displayed, there is a danger of camera shake, and you are recommended to use a tripod or a flash. (For details, refer to page 27.)