Pentax P3 P3 Manual - Page 32
completion
View all Pentax P3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Using in Metered Manual mode • Set the lens aperture to the f-stop indicated by the exposure table on the back of the flash. • As soon as the flash is ready, the camera is automatically switched to work at 1/100 sec. flash sync speed. (In Metered Manual mode, the slow-speed sync described later is workable.) Auto Flash Check Mark ( When a proper flash photo has been taken, the 5 mark in the viewfinder disappears for an instant just after the flash firing and lights up again or blinks, indicating the completion of a proper flash photography. The AF200SA does not have this Auto Flash Check function. Slow-Speed Sync Photography As you set the shutter speed between 1/60 and 1 sec. with the M camera set in the Metered Manual mode, you can take a slow-speed- sync photo. As soon as the flash is ready, " 5" and "M" marks plus the shutter speed set are displayed in the viewfinder. (1) When the shutter speed is set between 1/1000 and 1/125 sec., the camera is automatically switched to the flash sync speed of 1/100 sec., as soon as the flash is fully charged. (In this case, no shutter speed is displayed in the viewfinder.) (2) When the shutter speed "1" blinks in the viewfinder as an improper exposure warning, the shutter speed disappears on completion of the battery charging, but it is automatically set to one second. • 30