Pentax ist DL User Manual - Page 190

Troubleshooting - problems

Page 190 highlights

188 Troubleshooting Appendix We recommend checking the following items before contacting a service center. Problem Cause Remedy Batteries are not Check if batteries are installed. If not, installed install batteries. Camera does not turn on Batteries are not installed properly Check orientation of batteries. Re-insert batteries according to the +- symbols. (p.25) Battery power is low Replace with a charged battery set or use the AC adapter. (p.28) The shutter does not 6 release The lens aperture ring setting is other than the s position Set the lens aperture ring to the s position (p.133) or select [2 (Permitted)] in [Using aperture ring] in the [A Custom] menu (p.180). Flash is charging Wait until charging is finished. No available space Insert SD Memory Card with available on SD Memory space or delete unwanted images. (p.29, Card p.73) Recording Wait until recording is finished. Subject is difficult to focus on The Autofocus does not work Subject is not in focusing area Autofocus cannot focus well on subjects that have low contrast (the sky, white walls), dark colors, intricate designs, are moving quickly or scenery shot through a window or a net-like pattern. Lock focus on another object located at same distance (press shutter release button halfway), then aim at target and press shutter release button fully. Alternatively, use manual focus. (p.125) Position subject in focus frame in middle of viewfinder. If the subject is outside the focusing area, aim the camera at the subject and lock the focus (press shutter release button halfway), then compose picture and press the shutter release button fully. Subject is too close Move away from the subject and take a picture.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208

188
6
Appendix
Troubleshooting
We recommend checking the following items before contacting a service
center.
Problem
Cause
Remedy
Camera does
not turn on
Batteries are not
installed
Check if batteries are installed. If not,
install batteries.
Batteries are not
installed properly
Check orientation of batteries.
Re-insert batteries according to the
+-
symbols. (p.25)
Battery power is
low
Replace with a charged battery set or use
the AC adapter. (p.28)
The shutter
does not
release
The lens aperture
ring setting is other
than the
s
position
Set the lens aperture ring to the
s
position
(p.133) or select [2 (Permitted)] in [Using
aperture ring] in the [
A
Custom] menu
(p.180).
Flash is charging
Wait until charging is finished.
No available space
on SD Memory
Card
Insert SD Memory Card with available
space or delete unwanted images. (p.29,
p.73)
Recording
Wait until recording is finished.
The Autofocus
does not work
Subject is difficult
to focus on
Autofocus cannot focus well on subjects
that have low contrast (the sky, white
walls), dark colors, intricate designs, are
moving quickly or scenery shot through a
window or a net-like pattern. Lock focus on
another object located at same distance
(press shutter release button halfway),
then aim at target and press shutter
release button fully. Alternatively, use
manual focus. (p.125)
Subject is not in
focusing area
Position subject in focus frame in middle of
viewfinder. If the subject is outside the
focusing area, aim the camera at the
subject and lock the focus (press shutter
release button halfway), then compose
picture and press the shutter release
button fully.
Subject is too close
Move away from the subject and take a
picture.