Pentax ist DL User Manual - Page 191
correctly, it does not require any repairs., In rare cases
UPC - 027075113749
View all Pentax ist DL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
189 Problem Cause Remedy The focus mode is set to \. Set the focus mode lever to =. (p.118) The Autofocus does not work The focus mode is set to k (Continuous mode). Set the focus mode to l (Single mode). (p.122) The capture mode is set to \ (Moving Object) mode. Set the capture mode to setting other than \ (Moving Object) mode. (p.47) AE lock function does not operate AE lock is not available when set Use AE lock with any setting other than a to a (manual) mode (manual) mode or p (bulb) mode. or p (bulb) mode When flash mode is set to [Auto Flash does not discharge discharge] or [Auto flash+Redeye reduct], the flash will not discharge when Set flash mode to [Manual discharge] or [Manl flash+Redeye reduct]. (p.49) the subject is bright. Mode dial is set to Set mode dial to any setting other than 6 [Flash OFF] [Flash OFF]. (p.47) Appendix The power zoom system does not function The camera does not have the power Use manual zoom. (p.48) zoom function. USB connection with The transfer mode is set to [PictBridge]. Set transfer mode to [PC]. computer does An error occurred not work while sending USB Change the transfer mode to [PC-F]. properly* data. USB connection with printer does not work properly The transfer mode is set to [PC] or [PC-F]. Set transfer mode to [PictBridge]. (p.84) In rare cases, the camera may not operate correctly due to static electricity. This can be remedied by taking the batteries out and putting them back in again. When the mirror remains in the up position, take the batteries out and put them back in again. Then, turn the power on. The mirror will retract. After the procedure is done, if the camera operates correctly, it does not require any repairs. * Refer to p.13 of the "PENTAX PHOTO Browser 2.1/PENTAX PHOTO Laboratory 2.1 Operating Manual" for details on connecting the camera to a PC.