Pfaff creative 1472 Owner's Manual - Page 14

N: Switch on main switch 9, have material cover needle hole (see illustration B) and lower the sewing foot onto it by pressing presser bar lifter 17 down wards. Position A of lever 17 is for darning. J Press the pedal. The harder you press, the faster the Creative sews. 4 Needle thread tension 39 A = setting mark Important! In order to obtain good sewing results it is important to check the following: 1. that the needle is in good order, 2. and the needle- or bobbin thread tension is correct. The bobbin thread tension is adjusted correctly at the works. If on checking the bobbin thread ten sion (see page 16) you find it is neces sary to correct it, turn the adjusting screw by small amounts only. Checking the needle thread tension: The normal setting is from 3 to 5. The higher the number, the tighter the thread tension. This is checked with a wide zigzag stitch (program 10). Sew a short seam. The thread interlace should lie exactly between the two material plies. Range 3 is for buttonhole sewing \ J 24 25 - .. ... -