Pfaff creative vision Owner's Manual - Page 47
Sound settings B
View all Pfaff creative vision manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Sound settings (B) You can change the sound settings on your machine for different situations. First select from the list (G) which sound event you want to change. Then select the sound (H) you want to play by touching the button. You will be able to hear the sound when you touch the sound button. Each event can have a different sound. User defined sound If you want to import your own sound files, use the user defined icon (I) at the bottom of the list. A long touch of this icon will open Files & Folders. Find your sound file and touch the OK icon. The name of the loaded sound file is shown next to the button. The sound length for icon acknowledge, button/ icon disabled and for warning or attention popups is maximum 5 seconds. For starting up and embroidery finished, the maximum sound length is 30 seconds. The sound files must be stored either on your machine or, if connected, an external device or your PC. Note: You can only play PCM encoded WAV-files. For optimal result the file should be 8-bit mono. The machine will not support compressed sound files. We recommend always storing your sound files on your machine before importing them into user defined sound. Audio repeat When active, the signal for some warning or attention pop-ups is repeated in intervals until it is cancelled. Volume You can change the volume using the slider. G H I ABC Pfaff HD screen 3:11