Pfaff expression 150 Owner's Manual - Page 10

Preparations Unpacking 1. Place the box on a steady, Áat surface. Lift the machine out of the box, remove the outer packaging and lift off the machine carrying case. 2. Remove all outer packing material and the plastic bag. 3. Slide off the accessory tray and remove the styrofoam inside. Note: Styrofoam left in the accessory tray while sewing may affect stitch quality. The styrofoam is for packing purposes only and should be removed. Connect to the power supply Among the accessories you will Ànd the power cord and the foot control. Note: Before plugging in the foot control, check to ensure that it is type "FR5" (see underside of foot control). 1. Take out the foot control cord. Turn the foot control over. Connect the cord to the socket inside the space of the foot control. Push Àrmly to make sure it is properly connected. Lay the cord in the slot on the underside of the foot control. Note: Connecting the foot control cord to the foot control is only necessary the very Àrst time you are going to use the machine. 2. Connect the foot control cord to the front socket on the bottom right side of the machine (A). 3. Connect the power cord to the rear socket on the bottom right side of the machine (B). Plug the cord into the wall socket. 4. Press the ON/OFF switch to ON to turn on power and light (C). For the USA and Canada This sewing machine has a polarized plug (one blade wider than the other). To reduce the risk of electric shock, this plug is intended to Àt in a polarized outlet only one way. If the plug does not Àt fully in the outlet, reverse the plug. If it still does not Àt, contact a qualiÀed electrician to install the proper outlet. Do not modify the plug in any way. 10 - Preparations C A B