Pfaff expression 150 Owner's Manual - Page 11

Pack away after sewing 1. Switch the main switch off. 2. Unplug the cord from the wall socket and then from the machine. 3. Unplug the foot control cord from the machine. Wind the cord around the foot control for easy storage. 4. Place all accessories in the accessory tray. Slide the tray on to the machine around the free arm. 5. Place the foot control in the space above the free arm. 6. Put on the hard cover. Free arm To use the free arm, slide off the accessory tray. When attached, a hook keeps the accessory tray locked to the machine. Remove the tray by sliding it to the left. A Thread cutter To use the thread cutter, pull the thread from back to front as shown (A). Spool pins Your machine has two spool pins, a main spool pin and an auxiliary spool pin. The spool pins are designed for all types of thread. The main spool pin is adjustable and can be used both in a horizontal position (the thread reels off the spool) and a vertical position (the thread spool rotates). Use the horizontal position for normal threads and the vertical position for large spools or specialty threads. Horizontal position Place a spool cap and the thread spool on the spool pin. Make sure that the thread reels over the top and slide on a second spool cap. Use a spool cap slightly larger than the thread spool. For narrow thread spools, use a smaller spool cap in front of the spool. For large thread spools, use a larger spool cap in front of the spool. The Áat side of the spool cap should be pressed Àrmly against the spool. There should be no space between the spool cap and the thread spool. Small spool cap Large spool cap Preparations - 11