Pfaff hobbylock 4860 Owner's Manual - Page 71
Pfaff hobbylock 4860 Manual
View all Pfaff hobbylock 4860 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Bead sewing foot Tborhediasidnssa,pryesceciqaoulridsnses.w, Tsinhtrgeassfeosoobtpaeinsrdafsto,irolnseesawdairanengdcoanr ried out with one needle only. Preparing the machine: Program: Stitch length: Stitch width: Differential setting: Sewing foot pressure: Needle plate: Thread tension: Sewing foot: Upper knife: 4 (for small beads) 5 (for larger beads) 3 to 4 N to 5 N 1 or N rolled hem needle plate R see display (press mod key) bead sewing foot optionally disengaged ornot Sewing: 1. Raise the sewing foot and set the needle in its highest position. 2. Slide the bead tape through guide 1 and 2 to the back of the foot foot (fig. 1). 3. You can sew with or without the upper knife in all the seam width settings. Guide the fabric along the right hand sewing edge. 4. The needle should penetrate 1 to 1,5mm along the .edge of the fabric (fig. 2). Note: If the bead is sewn onto the the left needle must be used fabric edge, (disengage upper knife>. 67