Pfaff performance icon Users Guide - Page 124

Service, Non-Original Parts and Accessories, Technical specification

Page 124 highlights

Maintenance Is the bobbin thread evenly wound? Is a correct needle used? Check bobbin winding. Insert a proper needle correctly as described, see Changing the Needle, page 29. Use a needle suitable for selected fabric. See Selecting Correct Thread/Needle Combination, page 32. The Machine Does Not Feed or Feeds Irregularly Did you thread the machine properly? Remove the thread completely and rethread the machine, see Threading the Upper Thread, page 30. Has sewing lint collected between the feed teeth? Is the free motion setting on? Remove the needle plate and clean the feed teeth with the brush. Turn off free motion setting in sewing mode. Are the feed teeth set to down? Make sure the feed teeth are not set to down in the settings menu. Is the correct presser foot used? Attach correct presser foot. Service Have your sewing machine serviced regularly by your local authorized retailer! If you have followed this troubleshooting information and still have problems, contact your retailer. It may be helpful to bring the fabric, thread and stabilizer you are using with you. If you have a stitch out that shows the problem, please bring that as well. A sewing sample will often give better information than words and help your technician diagnose the problem. Non-Original Parts and Accessories The warranty does not cover any defect or damage caused by use of non-original accessories or parts. Technical specification performance icon™ machine Rated voltage Nominal consumption Light Sewing speed Foot control model Safety class WiFi module: Frequency Transmitting power Receiver sensitivity 100-120V/200-240V, 50-60Hz

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130

Maintenance
Is the bobbin thread evenly wound?
Check bobbin winding.
Is a correct needle used?
Insert a proper needle correctly as described, see
Changing the Needle, page 29.
Use a needle suitable for selected fabric. See Selecting
Correct Thread/Needle Combination, page 32.
The Machine Does Not Feed or Feeds Irregularly
Did you thread the machine properly?
Remove the thread completely and rethread the machine,
see Threading the Upper Thread, page 30.
Has sewing lint collected between the feed teeth?
Remove the needle plate and clean the feed teeth with
the brush.
Is the free motion setting on?
Turn off free motion setting in sewing mode.
Are the feed teeth set to down?
Make sure the feed teeth are not set to down in the
settings menu.
Is the correct presser foot used?
Attach correct presser foot.
Service
Have your sewing machine serviced regularly by your local authorized retailer!
If you have followed this troubleshooting information
and still have problems, contact your retailer. It may be
helpful to bring the fabric, thread and stabilizer you are
using with you. If you have a stitch out that shows the
problem, please bring that as well. A sewing sample will
often give better information than words and help your
technician diagnose the problem.
Non-Original Parts and Accessories
The warranty does not cover any defect or damage
caused by use of non-original accessories or parts.
Technical specification
performance icon™ machine
Rated voltage
100–120V/200–240V, 50–60Hz
Nominal consumption
<100W
Light
LED lamps
Sewing speed
1050 stitches/minute maximum
Foot control model
FR5
Safety class
II
WiFi module:
Frequency
Transmitting power
Receiver sensitivity
2.4GHz band 802.11 b/g/n
+17dBm
-97dBm
124