Pfaff performance icon Users Guide - Page 31
Needle Threader, until it clicks into place E, and down in the left
View all Pfaff performance icon manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
3. Hold the thread with two hands as illustrated. Floss the thread under the thread guide (A) from front to back. Pull thread back into and through threading slot (B). Note: Continue to hold the thread lightly next to the thread guide (A) throughout the threading process. This will create a bit of tension on the thread and ensure that the thread is properly seated in the threading path. B A 4. Pull the thread between the thread tension discs (C). Thread down through the right threading slot and then upwards through the left threading slot. Bring the thread from the right into the take-up lever (D) until it clicks into place (E), and down in the left threading slot to the last thread guide (F) just above the needle. 5. Thread the needle using the automatic needle threader or manually. Before using the automatic needle threader, carefully read the instructions and recommendations, see Using the Automatic Needle Threader, page 33. D C E F Preparations 31