Pfaff select 150 Owner's Manual - Page 15

Changing the bobbin Switch off the main switch (1) Removing the bobbin case and bobbin E Open the bobbin door at the left side swinging it open towards the front. Lift the latch (E) of the bobbin case and pull the bobbin case out of the machine. Release the latch and take the empty bobbin out of the bobbin case. Inserting the bobbin Insert the full bobbin (with the PFAFF® logo facing towards the bobbin case) into the bobbin case. In doing so, pull the thread sideways through slot A, then under the tension plate B until it rests in the opening (see arrow). Check: Hold the bobbin case with the bobbin A facing towards you. When you pull the thread, the bobbin must turn clockwise. B Inserting the bobbin case C Lift latch E and slide the bobbin case onto the hook pin C as far as it will go. Opening D of the bobbin case must face upwards. D Check: Pull the bobbin thread sharply. The bobbin case must not fall out of the hook. E Operate your sewing machine 15