Pfaff select 150 Owner's Manual - Page 21

Changing the needle, Setting the needle thread, tension, Dropping the feed dogs

Get Pfaff select 150 PDF manuals and user guides View all Pfaff select 150 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

A Changing the needle Switch off the main switch. To remove: Lower the presser foot and move the needle to its highest point. Now loosen the needle screw (24) and pull the needle down. To insert: The Áat side A of the needle must face to the rear. Lower the presser foot and insert the needle, pushing it up as far as it goes. Hold the needle and tighten the needle screw (24) Àrmly. B Setting the needle thread tension Set the required needle thread tension (11) with the help of the mark B. The normal setting for sewing is 4 to 5. For free-motion sewing, darning and buttonhole set the tension between 2 and 3. Dropping the feed dogs For certain sewing work, e.g. darning or free-motion sewing the feed dogs have to be dropped. To do this, open the bobbin case/hook cover and move slide C fully to the right. C Now the feed dogs are dropped. Operate your sewing machine 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
21
C
B
A
Operate your sewing machine
Changing the needle
Switch off the main switch.
To remove:
Lower the presser foot
and move the needle to its highest
point. Now loosen the needle screw
(24) and pull the needle down.
To insert:
The
Á
at side A of the
needle must face to the rear. Lower
the presser foot and insert the
needle, pushing it up as far as it
goes. Hold the needle and tighten
the needle screw (24)
À
rmly.
Setting the needle thread
tension
Set the required needle thread tension
(11) with the help of the mark B.
The normal setting for sewing is 4 to 5.
For free-motion sewing, darning and
buttonhole set the tension between 2 and
3.
Dropping the feed dogs
For certain sewing work, e.g. darning or
free-motion sewing the feed dogs have to
be dropped.
To do this, open the bobbin case/hook
cover and move slide C fully to the right.
Now the feed dogs are dropped.