Pfaff select 150 Owner's Manual - Page 35

Optional presser feet The limited edition accessory foot package is packed in the box with your PFAFF® select™ sewing machine. The package contains the following optional presser feet: Couching/Braiding foot You can create beautiful trims when you use the Couching/Braiding Foot and your machine's decorative stitches to sew over yarn, cords, narrow satin ribbon, soutache braid, etc. 1. To attach cords, use matching, invisible or decorative embroidery thread. 2. Insert the cording or tape from the front of the foot into the eyelet-type guide and pull it through the front hole, underneath and to the back of the presser foot. 3. Engage the IDT™ system. 4. Select stitch, i.e. zigzag, blind hem or decorative. Sew the design by following the pre-marked design lines. Or, sew random lines and waves for a decorative textured effect. TIP: Try several smaller cords and yarns, twist them together to create texture and combine colors. 7/9 hole cord foot Wonderful decorative embellishments are easy with this special foot. You can sew up to nine different lengths of embroidery Áoss, pearl cotton or high sheen threads in place with your choice of a decorative or utility stitch. 1. Cut your cords to the desired length. Thread the cords through the holes in the foot from the top to the bottom. Lead the cords under the presser foot and out the back. Leave the thread tails extending about 1 1/2 inches to 2 inches (4 - 5 cm) at the back. Utility stitches and practical sewing 35